Call us now Tel: 086-18814220505         Tel: 086-18819777768
XC95288-20HQ208C

XC95288-20HQ208C

  • Product Code: XC95288-20HQ208C
  • Availability: In Stock

The XC95288XL is a 3.3V CPLD targeted for high-performance, low-voltage applications in leading-edge communications and computing systems. It is comprised of 16 54V18 Function Blocks, providing 6,400 usable gates with propagation delays of 6 ns.


Power Estimation 


Power dissipation in CPLDs can vary substantially depending on the system frequency, design application and output loading. To help reduce power dissipation, each macrocell in a XC9500XL device may be configured for low-power mode (from the default high-performance mode). In addition, unused product-terms and macrocells are automatically deactivated by the software to further conserve power. For a general estimate of ICC, the following equation may be used:


ICC(mA) = MCHS(0.175*PTHS + 0.345) + MCLP(0.052*PTLP

+ 0.272) + 0.04 * MCTOG(MCHS +MCLP)* f

where:

MCHS = # macrocells in high-speed configuration

PTHS = average number of high-speed product terms per macrocell

MCLP = # macrocells in low power configuration

PTLP = average number of low power product terms per macrocell

f = maximum clock frequency

MCTOG = average % of flip-flops toggling per clock (~12%)

This calculation was derived from laboratory measurements of an XC9500XL part filled with 16-bit counters and allowing a single output (the LSB) to be enabled. The actual ICC value varies with the design application and should be verified during normal system operation. 288 macrocells with 6,400 usable gates

Available in small footprint packages

144-pin TQFP (117 user I/O pins)

208-pin PQFP (168 user I/O pins)

280-pin CSP (192 user I/O pins)

256-pin FBGA (192 user I/O pins)

Optimized for high-performance 2.5V systems

Low power operation

Multi-voltage operation

Advanced system features

In-system programmable

Four separate output banks

Superior pin-locking and routability with Fast CONNECT™ II switch matrix

Extra wide 54-input Function Blocks

Up to 90 product-terms per macrocell with individual product-term allocation

Local clock inversion with three global and one product-term clocks

Individual output enable per output pin

Input hysteresis on all user and boundary-scan pin inputs

Bus-hold ciruitry on all user pin inputs

Full IEEE Standard 1149.1 boundary-scan (JTAG)

Fast concurrent programming

Slew rate control on individual outputs

Enhanced data security features

Excellent quality and reliability

20 year data retention

ESD protection exceeding 2,000V