Call us now Tel: 086-18814220505         Tel: 086-18819777768
XC6SLX100T-3FGG676I

XC6SLX100T-3FGG676I

  • Product Code: XC6SLX100T-3FGG676I
  • Availability: In Stock

The Spartan®-6 family provides leading system integration capabilities with the lowest total cost for high-volume applications. The thirteen-member family delivers expanded densities ranging from 3,840 to 147,443 logic cells, with half the power consumption of previous Spartan families, and faster, more comprehensive connectivity. Built on a mature 45 nm low-power copper process technology that delivers the optimal balance of cost, power, and performance, the Spartan-6 family offers a new, more efficient, dual-register 6-input lookup table (LUT) logic and a rich selection of built-in system-level blocks. These include 18 Kb (2 x 9 Kb) block RAMs, second generation DSP48A1 slices, SDRAM memory controllers, enhanced mixed-mode clock management blocks, SelectIO™ technology, poweroptimized high-speed serial transceiver blocks, PCI Express® compatible Endpoint blocks, advanced system-level power management modes, auto-detect configuration options, and enhanced IP security with AES and Device DNA protection. These features provide a lowcost programmable alternative to custom ASIC products with unprecedented ease of use. Spartan-6 FPGAs offer the best solution for high-volume logic designs, consumer-oriented DSP designs, and cost-sensitive embedded applications. Spartan-6 FPGAs are the programmable silicon foundation for Targeted Design Platforms that deliver integrated software and hardware components that enable designers to focus on innovation as soon as their development cycle begins.Spartan-6 Family:

Spartan-6 LX FPGA: Logic optimized

Spartan-6 LXT FPGA: High-speed serial connectivity

Designed for low cost

Multiple efficient integrated blocks

Optimized selection of I/O standards

Staggered pads

High-volume plastic wire-bonded packages

Low static and dynamic power

45 nm process optimized for cost and low power

Hibernate power-down mode for zero power

Suspend mode maintains state and configuration with multi-pin wake-up, control enhancement

Lower-power 1.0V core voltage (LX FPGAs, -1L only)

High performance 1.2V core voltage (LX and LXT FPGAs, -2, -3, and -3N speed grades)

Multi-voltage, multi-standard SelectIO™ interface banks

Up to 1,080 Mb/s data transfer rate per differential I/O

Selectable output drive, up to 24 mA per pin

3.3V to 1.2V I/O standards and protocols

Low-cost HSTL and SSTL memory interfaces

Hot swap compliance

Adjustable I/O slew rates to improve signal integrity

High-speed GTP serial transceivers in the LXT FPGAs

Up to 3.2 Gb/s

High-speed interfaces including: Serial ATA, Aurora, 1G Ethernet, PCI Express, OBSAI, CPRI, EPON, GPON, DisplayPort, and XAUI

Integrated Endpoint block for PCI Express designs (LXT)

Low-cost PCI® technology support compatible with the 33 MHz, 32- and 64-bit specification.

Efficient DSP48A1 slices

High-performance arithmetic and signal processing

Fast 18 x 18 multiplier and 48-bit accumulator

Pipelining and cascading capability

Pre-adder to assist filter applications

Integrated Memory Controller blocks

DDR, DDR2, DDR3, and LPDDR support

Data rates up to 800 Mb/s (12.8 Gb/s peak bandwidth)

Multi-port bus structure with independent FIFO to reduce design timing issues

Abundant logic resources with increased logic capacity

Optional shift register or distributed RAM support

Efficient 6-input LUTs improve performance and minimize power

LUT with dual flip-flops for pipeline centric applications

Block RAM with a wide range of granularity

Fast block RAM with byte write enable

18 Kb blocks that can be optionally programmed as two independent 9 Kb block RAMs

Clock Management Tile (CMT) for enhanced performance

Low noise, flexible clocking

Digital Clock Managers (DCMs) eliminate clock skew and duty cycle distortion

Phase-Locked Loops (PLLs) for low-jitter clocking

Frequency synthesis with simultaneous multiplication, division, and phase shifting

Sixteen low-skew global clock networks

Simplified configuration, supports low-cost standards

2-pin auto-detect configuration

Broad third-party SPI (up to x4) and NOR flash support

Feature rich Xilinx Platform Flash with JTAG

MultiBoot support for remote upgrade with multiple bitstreams, using watchdog protection

Enhanced security for design protection

Unique Device DNA identifier for design authentication

AES bitstream encryption in the larger devices

Faster embedded processing with enhanced, low cost, MicroBlaze™ soft processor

Industry-leading IP and reference designs