The XC95108-10PC84C is a high-performance CPLD providing advanced in-system programming and test capabilities for general purpose logic integration. It is comprised of eight 36V18 Function Blocks, providing 2,400 usable gates with propagation delays of 7.5 ns. 

Power dissipation can be reduced in the XC95108-10PC84C by configuring macrocells to standard or low-power modes of operation. Unused macrocells are turned off to minimize power dissipation.

Operating current for each design can be approximated for specific operating conditions using the following equation:

ICC (mA) = MCHP (1.7) + MCLP (0.9) + MC (0.006 mA/MHz) f

Where:

MCHP = Macrocells in high-performance mode

MCLP = Macrocells in low-power mode

MC = Total number of macrocells used

f = Clock frequency (MHz)

• 7.5 ns pin-to-pin logic delays on all pins

• fCNT to 125 MHz

• 108 macrocells with 2,400 usable gates

• Up to 108 user I/O pins

• 5V in-system programmable

- Endurance of 10,000 program/erase cycles

- Program/erase over full commercial voltage and temperature range

• Enhanced pin-locking architecture

• Flexible 36V18 Function Block

- 90 product terms drive any or all of 18 macrocells within Function Block

- Global and product term clocks, output enables, set and reset signals

• Extensive IEEE Std 1149.1 boundary-scan (JTAG) support

• Programmable power reduction mode in each macrocell

• Slew rate control on individual outputs

• User programmable ground pin capability

• Extended pattern security features for design protection

• High-drive 24 mA outputs

• 3.3V or 5V I/O capability

• Advanced CMOS 5V FastFLASH™ technology

• Supports parallel programming of more than one XC9500 concurrently

• Available in 84-pin PLCC, 100-pin PQFP, 100-pin TQFP, and 160-pin PQFP packages