Functional Overview

CY7C65213/CY7C65213A is a fully integrated USB-to-UART bridge that provides a simple method to upgrade UART-based devices to USB with a minimal number of components. CY7C65213/CY7C65213A includes a USB 2.0 Full-Speed controller, a UART transceiver, an internal regulator, an internal oscillator, and a 512-byte flash in a 32-pin QFN and 28-pin SSOP package.

The internal flash is used to store custom-specific USB descriptors and GPIO configuration. This is done in-system using a configuration utility that communicates over the USB interface.

Cypress provides royalty-free Virtual COM Port (VCP) device drivers. The drivers allow the device to appear as a COM port in PC applications. All UART signals, including handshaking and control signals, are implemented.

Features

■ USB 2.0 certified, Full-Speed (12 Mbps)

❐ Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-device class

❐ Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev. 1.2 (peripheral detect only)

❐ Integrated USB termination resistors

■ Single-channel configurable UART interfaces

❐ Supports 2-pin, 4-pin, 6-pin, 8-pin UART interface

❐ Data rates up to 3 Mbps

❐ 256 bytes for each transmit and receive buffer

❐ Data format:

• 7 or 8 data bits

• 1 or 2 stop bits

• No parity, even, odd, mark, or space parity

❐ Supports parity, overrun, and framing errors

❐ Supports flow control using CTS, RTS, DTR, DSR

❐ Supports UART break signal

❐ CY7C65213 supports single channel RS232/RS422 interfaces whereas CY7C65213A supports RS232/RS422/RS485 interfaces

■ General-purpose input/output (GPIO): 8 pins

■ Supports unique serial number feature for each device, which fixes the COM port number permanently when USB-UART LP Bridge controller device plugs in

■ Configuration utility (Windows) to configure the following:

❐ Vendor ID (VID), Product ID (PID), and Product and Manufacturer descriptors

❐ UART

❐ Charger detection

❐ GPIO

■ Driver support for VCOM and DLL

❐ Windows 10: 32- and 64-bit versions

❐ Windows 8.1: 32- and 64-bit versions

❐ Windows 8: 32- and 64-bit versions

❐ Windows 7: 32- and 64-bit versions

❐ Windows Vista: 32- and 64-bit versions

❐ Windows XP: 32- and 64-bit versions

❐ Windows CE

❐ Mac OS-X: 10.6, and later versions

❐ Linux: Kernel version 2.6.35 and later versions

❐ Android: Gingerbread and later versions

■ 512-byte flash for storing configuration parameters

■ Clocking: Integrated 48-MHz clock oscillator

■ USB suspend mode for low power

■ Supports bus-/self-powered configurations

■ Compatible with USB 2.0 and USB 3.0 host controllers

■ Operating voltage: 1.71 to 5.50 V

■ Operating temperature:

❐ Commercial: 0 °C to 70 °C

❐ Industrial: –40 °C to 85 °C

■ ESD protection: 2.2-kV HBM

■ RoHS-compliant package

❐ 28-pin SSOP (10 × 7.5 × 1.65 mm, 0.65-mm pitch)

❐ 32-pin QFN (5 × 5 × 1 mm, 0.5-mm pitch)

■ Ordering part number

❐ CY7C65213-28PVXI

❐ CY7C65213-32LTXI

❐ CY7C65213A-28PVXI

❐ CY7C65213A-32LTXI

Applications

■ Blood glucose meter

■ Battery-operated devices

■ USB-to-UART cables

■ Enables USB connectivity in legacy peripherals with UART

■ Point-of-Sale (POS) terminals

■ Industrial and T&M (Test and Measurement) devices